Inquiry Details


Submission Information
Tracking #: 8452
Date Submitted: 09/14/2015
Status: Resolved (IP Change)
Inquiry Resolution

IP Explanation Database Reference Manual Section 4-4 Refinish Guidelines: Chipguard defines the Audatex automated formula for this operation. When special requirements are needed for a specific vehicle, the estimator would have to account for those requirements manually. No changes warranted at this time

Vehicle Information
Year: 2014
Make: CHEVROLET
Model: SILVERADO
Body: Pickup
Inquiry Description

Inquiry Type: Refinish Operations

Description: Chipguard

Inquiry Details
AreaVehicle BOX SIDE Section6_IssueSummary WHEN REPLACING THE BOXSIDE, THE CHIPGUARD NEEDS TO BE REPLACED AS WELL. THE CHIPGUARD ON THE NEWER GM MODELS ARE DIFFERENT THEN THE PAST MODELS. (THE PAST HAD 3M CLEAR STONEGUARDS IN FRONT & REAR OF WHEELS) THE CHIPGUARD AREA IS EXTENSIVE - A TEMPLATE NEEDS TO BE MADE FOR THE AREA IN FRONT OF THE WHEEL & THE AREA BEHIND THE WHEEL IS Section6_Special A TEMPLATE NEEDS TO BE MADE FOR THE AREA IN FRONT OF THE WHEEL. Section6_EstimatedSurface REAR OF WHEEL 187 SQUARE INCHES & THE HIGHEST POINT ON THE AREA IN FRONT OF THE WEEL IS 11 INCHES HIGH AT THE TOP OF TEMPLATE AND THE AREA IS 24 INCHES ALONG THE BOTTOM. THE AREA IN SQUARE INCHES IS ROUGHLY 264, HOWEVER, THE ENTIRE AREA OF THAT NUMBER DOES NOT NEED CHIP GUARD. Section6_SuggestedAction ADDITIONAL TIME NEEDED TO COVER MAKING TEMPLATE & AREA IN NEED OF CHIP GUARD.
Edit Inquiry Fields

Vehicle


*
*
*
*

Contact Information


*
*
*

Database Inquiry


If applicable
hours minutes
hours minutes
square inches
hours minutes

Attachments


Inquiry Details (from old database)


Resolution Date